 Basic Safety Rules
The recommendations of this instruction are only a summary of the most important precautions. All users must strictly follow the safety instructions existing in the laws, decrees and technical standards of their country and in machine instructions.
 DO:
* Select the product suited to the application.
* Inspect the product before mounting on the machine: visual inspection and ring test when applicable.
* machine max. RPM shall never exceed max. RPM marked on the wheel.
* Carefully mount on the machine following machine builder instructions and wheel marking.
* Start the machine and run it idle for at least 30 seconds, with all personnel away, every time a new or used wheel is mounted.
DON'T : * Run a wheel at a rotational frequency higher that the maximum RPM marked on the wheel or its label.
* Grind on the side of a wheel which is not designed for this operation.
* Abuse a wheel with too much grinding pressure, shocks etc.
* Dress the wheel with an inadequate tool. For more complete information see the safety recommendations for general applications or for hand held machines.
|
